About Us
Trusted Warehouse Rack Manufacturers in Delhi, India
Industrial storage rack manufacturer in Delhi NCR, making since 1998
Spanco Storage Systems manufactures industrial storage racks at its own 5,000 sq m plant at Plot No. 22, Sector-16, HSIIDC, Bahadurgarh — about 40 km from central Delhi. We have been doing it since 1998, which is long enough to have seen most of the ways a racking project goes wrong.
We are a manufacturer, not a trading house. We buy cold-rolled and hot-rolled coil from TATA Steel and SAIL conforming to IS 513 and IS 10743, roll-form it, powder coat it in house and dispatch direct. We also supply dealers, wholesalers and stockists on rate contract by weight, and export on request. That matters when you need a bay loading you can rely on, because the person quoting the load is the person who made the beam.
What we manufacture
Pallet racking systems
Pallet racking at 500 kg to 2000 kg per beam level, with spans of 1500, 1800, 2300, 2700 and 3000 mm and frames from 3000 mm to 6000 mm. Available as selective, double-deep, drive-in and FIFO flow racking. Heavy duty pallet racks are the single most common thing we ship into Delhi NCR warehouses.
Slotted angle and light duty racks
Slotted angle racks from 5 ft to 10.5 ft at 50 kg to 200 kg per level, in angle from 1.2 mm to 2.5 mm. This family covers light duty storage racks, medium duty racks and steel storage racks for hand-loaded stock, spares and file and record storage.
Mezzanine floors and multi-tier structures
Mezzanine floors at 300, 500 or 750 kg/m² with clear heights from 2000 mm to 5000 mm, supplied as modular mezzanine floors that bolt together with no site welding. Where you need storage density rather than open floor, multi tier racking and two tier structures do the same job differently.
Mobile compactors and archive storage
Mobile compactor storage systems at 300 kg to 1000 kg per bay, 4 to 6 levels, systems from 5 m to 12 m. Includes file storage compactors for hospital records, bank archives, courts and colleges.
Long items, drums and specialist duty
Cantilever racks and long span racks for pipe, tube, bar, timber and sheet, up to 1000 kg per arm. Drum storage racks with 50 to 100 litre spill trays. Cold storage racks in galvanised finish, and fabric storage racks for textile and garment units.
How to work out what you need
Four numbers decide almost every racking specification: the heaviest unit load that will sit on one level, the footprint of that load, the clear height from floor to the lowest obstruction, and what lifts the goods — hand, stacker or forklift.
As a working rule, if a person lifts it you want slotted angle. If a machine lifts it on a pallet you want pallet racking. If you have height you are not using, a mezzanine buys floor rather than shelves. If files have taken over a room, you want a compactor. Our storage racks overview sets the families side by side by load and height.
A caution on load figures
Beam and shelf capacities are quoted as uniformly distributed loads. Two heavy point loads near mid-span behave very differently from a full pallet of the same total weight, so tell us how the goods actually sit rather than only what they weigh. Frame capacity is a separate calculation again, covering every level together plus the bracing pattern.
Supplying Delhi NCR and across India
Bahadurgarh sits on the Delhi–Rohtak corridor. Deliveries to Delhi, Gurugram, Noida, Greater Noida, Faridabad, Ghaziabad, Sonipat, Rohtak, Jhajjar, Manesar and Bhiwadi are routine, and we dispatch across India as manufacturer, supplier and exporter. Installation is by our own team. Because everything is bolted rather than site-welded, racking can be dismantled and relocated when you move premises.
Request a quotation
Send the four numbers above, or simply a photograph of the space, to +91-9811015963 or through our enquiry form. Minimum order is 10 pieces, or by weight on rate-contract supply. Typical lead time is about two weeks from order confirmation. Price depends on steel weight, gauge and finish rather than on a fixed list, so a drawing-backed quotation is usually within a day of receiving your dimensions.
