Steel Racks Manufacturer in Delhi – Storage That Feels Reliable
In Delhi, storage is never just about keeping things in order. It’s about finding a system that actually works day after day. As a Steel Racks Manufacturer in Delhi, we design racks that feel strong enough for heavy loads but also flexible when space keeps changing. You might notice how their solid frames make a warehouse feel safer, or how a neat row of racks instantly clears up clutter in an office.
From our years as Steel Racks Manufacturers in Delhi, we’ve seen how much difference a dependable rack makes. When shelves don’t bend under pressure, when the finish keeps rust away, and when the layout feels easy to manage—it saves both time and energy. That’s why so many businesses here lean on steel racks as their go-to choice.
What we control by making Steel Racks ourselves
Strong frames built to hold weight without any bending worries
Shelves you can adjust to fit both small items and bulk storage
Simple designs that free up floor space in busy areas
Protective coating that helps racks stay rust-free for years
Custom sizes so every rack feels like it belongs in your space
Steel Racks Supplier in India – Dependable Racks, Always on Time
Being a Steel Racks Supplier in India means more than just delivering products. It means being there when people need them most. Across India, businesses often tell us how timely supply helps them avoid delays and keeps their work moving smoothly. You might notice how a ready stock of racks can mean the difference between a cluttered workspace and one that runs efficiently.
As trusted Steel Racks Suppliers in India, we make sure every rack that leaves us is tested, packed safely, and ready to use. That way, customers don’t just get racks—they get peace of mind knowing things will arrive on time and in good condition.
Supplying Steel Racks outside Delhi NCR
Deliveries that stay on schedule so daily work never slows down
Flexible supply whether you need just a few racks or a large order
Secure packaging that keeps racks safe from scratches in transit
Stock available even when demand is high across the country
Quick reordering with a team that responds fast to questions
Steel Racks Dealer in Delhi – Local Access, Personal Support
Sometimes what matters most is not just the rack but how easily you can get it. As a Steel Racks Dealer in Delhi, we bring racks closer to people who need them, along with small but useful advice on which type suits them best. You might notice how much smoother it feels when a dealer nearby understands the day-to-day challenges of storage in Delhi.
Our role as approachable Steel Racks Dealers in Delhi is to make the whole process simpler. Clients often tell us it’s the quick access, the fair prices, and the personal touch that make their buying experience easier—not just the racks themselves.
Buying Steel Racks locally in Delhi NCR
Local presence that saves you from long waits and transport hassles
Simple guidance to help match rack types with your exact needs
Ready stock for urgent orders when space issues can’t wait
Fair pricing that supports both small offices and large warehouses
Easy access to extra shelves or spare parts when required
Specifications — Steel Racks
Steel Racks are built on our
Slotted Angle Racks range, so the figures below are that
range's standard sizes.
Spanco manufactures to order, so these are what is
produced at the Bahadurgarh plant rather than a fixed catalogue size.
Final bay loading is confirmed against your pallet weight, bay width and
level configuration before drawings are issued.
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for Slotted Angle Racks
Rack height
5 ft to 10.5 ft (1500–3200 mm)
Bay width
750 mm, 900 mm or 1200 mm
Shelf depth
300 mm, 375 mm, 450 mm or 600 mm
Load per level (UDL)
50 kg to 200 kg, evenly distributed
Angle thickness
1.2 mm (18 g), 1.6 mm (16 g), 1.8 mm, 2.0 mm (14 g) or 2.5 mm (12 g)
Shelf panel thickness
0.8 mm (22 g) to 1.0 mm (20 g)
Levels
Typically 4 to 7, adjustable on 25 mm slot pitch
Material
Mild steel, CR/HR coil to IS 513 / IS 10743
Finish
Powder coated
Assembly
Nut and bolt, fully dismantlable
Configuration options
Shelf panel in MS sheet or chipboard
Open or closed back
Add-on bays sharing uprights
Dust covers
Label holders
Questions buyers ask before ordering
Do you manufacture Steel Racks to custom sizes?
Yes. Steel Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
What load can a slotted angle rack take per shelf?
Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.
When should I use slotted angle instead of pallet racking?
The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.
Can shelf heights be changed later?
Yes. The angle is slotted on a 25 mm pitch, so levels can be repositioned with a spanner. Nothing is welded, so bays can also be extended, shortened or relocated.
Do you supply slotted angle racks as a manufacturer or a dealer?
As a manufacturer. We roll-form the angle and shelf panels at our own plant at HSIIDC Bahadurgarh from TATA Steel and SAIL coil, powder coat in house, and dispatch direct. We also supply to dealers and stockists on rate contract by weight.
What is the minimum order and lead time?
Minimum order is 10 pieces, or by weight on rate-contract supply. Typical lead time is about two weeks from order confirmation, subject to the size of the order and the finish specified.
We hold no Delhi stock and have no Delhi branch. Everything is made to order at our Bahadurgarh plant, inside the NCR, and installed at your premises by our own team. The plant is open to visit.
Steps of manufacture
How we work
Every rack on this site is made on one line at our own
5000 m² plant in Bahadurgarh.
Nothing is bought in and re-badged, which is why we can answer for the
steel grade, the coating and the bay loading on the same call.
1
Steel coil in
Cold-rolled and hot-rolled coil from TATA Steel and SAIL arrives at the Bahadurgarh plant and is checked against IS 513 and IS 10743 before anything is cut.
2
Punching
Coil is slit to width and punched on the press. Upright perforation pitch is set here, and it is what decides the beam levels you can later move.
3
Roll forming
Flat strip is passed through the forming line and comes out as the finished section — upright, beam or panel — with the stiffening bends that carry the load.
4
Shot blasting
Mill scale and rust are stripped off the formed sections so that paint has clean, keyed steel to hold on to. Skipping this is why cheap racking flakes.
5
Welding and assembly
Bracing is welded to the uprights and beam end-connectors are fitted. Frames are squared on the jig so bays line up on site rather than being forced true.
6
Powder coating
Sections are pre-treated and powder coated, then oven cured. The coat is what stands up to forklift rub, humidity and cold-store condensation.
7
Packing
Uprights, beams and accessories are bundled by bay and labelled, so the right parts reach the right run and nothing is counted twice on site.
8
Delivery and installation
Dispatch runs approximately 2 weeks from order confirmation. Our own team installs and hands over; everything is bolted, so a run can be re-pitched or relocated later.
Other racking in this range
Close alternatives to Steel Racks, built on the
same line and to the same material standard.
