Every storage rack we manufacture, on one page
Storage rack is a broad term and the wrong choice is expensive to undo. This page exists so you can narrow down before asking for a price. Every system below is manufactured at our own plant at HSIIDC Bahadurgarh, so the load figures come from the people who roll-form the steel rather than from a brochure.
Choosing by load rather than by name
Hand-loaded stock
Below roughly 200 kg per level and loaded by hand, slotted angle racking is the economical answer. The same family gives you light duty storage racks for cartons and spares, medium duty racks for heavier hand loads, and steel storage racks for general godown duty.
Palletised stock
Once a pallet and a forklift are involved you need pallet racking, where beam section and span start to matter. Heavy duty pallet racks run from 500 kg to 2000 kg per beam level in our standard build.
Long and awkward material
Pipe, tube, bar, timber and sheet will not sit sensibly on a pallet. Cantilever racks carry up to 1000 kg per arm with no front upright in the way, and long span racks suit bulky but lighter items.
Height you are not using
If the building has clear height above the stock, a mezzanine floor usually buys more usable area per rupee than taller racking, because you get floor rather than shelves. Where density matters more than open space, multi tier racking and two tier structures are the alternative.
Archives and specialist duty
Mobile compactors for records, drum storage racks with spill containment, cold storage racks in galvanised finish, and fabric storage racks for textile units.
Materials and finish
All systems are made from cold-rolled and hot-rolled mild steel coil bought from TATA Steel and SAIL, conforming to IS 513 and IS 10743, and finished in powder coating. Cold-store and persistently humid applications are supplied galvanised instead, because condensation cycling is harder on a painted finish than steady damp. Every system is bolted rather than site-welded, so it can be reconfigured or relocated.
Buying from a manufacturer rather than a reseller
Spanco is a manufacturer, registered as a proprietorship under GST 06AACPV9583F1Z8, operating a 5,000 sq m plant since 1998. In practice, buying direct means the bay loading is confirmed against your actual pallet weight before drawings are issued, a change to bay width or level pitch does not become a renegotiation, and installation is carried out by our own team. We also supply dealers, wholesalers and stockists on rate contract, and export on request.
Coverage and lead time
Routine deliveries across Delhi, Gurugram, Noida, Faridabad, Ghaziabad, Sonipat, Rohtak, Jhajjar, Manesar and Bhiwadi, with pan-India dispatch. Minimum order 10 pieces or by weight on rate contract, and typical lead time around two weeks from order confirmation.
Which system suits your load?
This page covers several racking families. The comparison below is the
quickest way to narrow down before you ask for a quotation.
Questions buyers ask before ordering
Do you manufacture Storage Racks to custom sizes?
Yes. Storage Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
What load can your Storage Racking Systems carry per level?
Our Storage Racking Systems are built from 500 kg to 2000 kg per beam level as a uniformly distributed load, with beam spans of 1500 to 3000 mm and frame depths of 600 to 1200 mm. The exact figure depends on the beam section and the span, so send us the heaviest pallet weight and how many pallets sit on one level.
What load can a slotted angle rack take per shelf?
Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.
How do I calculate the pallet rack capacity I need?
Start with the heaviest single pallet you will store, not the average. Multiply by the number of pallets that will sit on one beam level, which is usually two or three depending on beam span. That total is the figure the beam pair must carry as a uniformly distributed load. Then check the frame separately: add every level together and that is what the upright and its bracing must carry down to the floor. Our standard range is 500 kg to 2000 kg per beam level.
When should I use slotted angle instead of pallet racking?
The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.
What is the difference between selective, double-deep and drive-in pallet racking?
Selective gives you a clear aisle to every pallet, so any pallet can be picked at any time. Double-deep stores pallets two rows deep, which adds pallet positions in the same floor area but means the front pallet must be moved to reach the one behind, and it needs a double-reach truck. Drive-in lets the truck enter the rack structure itself and gives the highest density, but you lose selectivity entirely, so it suits a small number of SKUs held in quantity. Selective suits most operations; density systems pay off when you have few SKUs and many pallets of each.
Can shelf heights be changed later?
Yes. The angle is slotted on a 25 mm pitch, so levels can be repositioned with a spanner. Nothing is welded, so bays can also be extended, shortened or relocated.
What is FIFO racking and when is it worth it?
FIFO means first in, first out. Flow racking uses a gravity roller track so pallets or cartons loaded at the back present themselves at the pick face in the order they were loaded. It matters where stock has a shelf life or a batch number that must rotate, such as food, pharmaceutical and chemical storage. If your stock does not age, plain selective racking is usually the better value.
Do you supply slotted angle racks as a manufacturer or a dealer?
As a manufacturer. We roll-form the angle and shelf panels at our own plant at HSIIDC Bahadurgarh from TATA Steel and SAIL coil, powder coat in house, and dispatch direct. We also supply to dealers and stockists on rate contract by weight.
How much aisle width does pallet racking need?
Aisle width is set by the truck, not by the rack. A counterbalance forklift needs a wider aisle than a reach truck, and a reach truck needs more than a very narrow aisle machine. This is why we ask what handles the pallets before laying out the bays: choosing the rack first and the truck afterwards is how warehouses end up with aisles that do not work.
What is the minimum order and lead time?
Minimum order is 10 pieces, or by weight on rate-contract supply. Typical lead time is about two weeks from order confirmation, subject to the size of the order and the finish specified.
Are safety accessories included?
Beam connectors are supplied with safety pins as standard so a beam cannot be lifted out by a rising fork. Column guards, end-of-aisle barriers, pallet support bars and mesh decking are quoted as options. We recommend guards anywhere a truck turns.
Do you supply pallet racking outside Delhi NCR?
Yes. Delhi, Gurugram, Noida, Faridabad, Ghaziabad, Sonipat, Rohtak and Manesar are routine deliveries from Bahadurgarh, and we dispatch across India as a manufacturer, supplier and exporter.
Do you provide on-site measurements in Delhi?
Yes! As a local manufacturer, we offer site visits across Delhi/NCR to design a layout that maximizes your square footage and efficiency.</p>
What is the lead time for nationwide delivery?
Standard orders are dispatched from our <strong>Bahadurgarh unit</strong> within 3-5 business days. Custom industrial projects follow a specific project timeline.</p>
Are your storage racks suitable for cold storage?
Absolutely. We manufacture specialized galvanized and stainless steel racks designed to withstand sub-zero temperatures without losing structural integrity.</p>
Not covered here? Call +91-9811015963 or
send your requirement and we will answer it against your actual load.
Why buyers choose Spanco
28 years
Manufacturing since 1998
5,000 m²
Own plant at HSIIDC Bahadurgarh
TATA / SAIL steel
CR & HR coil to IS 513 / IS 10743
~2 weeks
Typical lead time from order confirmation
Spanco Storage Systems ·
Proprietorship ·
GST 06AACPV9583F1Z8 ·
Plot No. 22, Sector-16, HSIIDC, Bahadurgarh, Haryana 124507
