Steel Racks in Sampla – Built to Your Bay and Load

Steel Racks Manufacturer in Sampla

Our plant is inside Haryana, at HSIIDC Bahadurgarh, so the road leg to Sampla is short and so is the loop if a bay has to be re-made. A Steel Rack is a bolted angle frame with adjustable shelf panels, assembled and re-pitched on site without welding. Most of what we send to Haryana goes into automotive and engineering suppliers, with large component stores feeding assembly plants to a schedule.

What decides the specification in Haryana

Most Haryana enquiries are driven by throughput: the rack has to make the right item reachable now, not eventually. For Steel Racks the figure that settles it is shelf pitch and the weight on one level, because the stock list changes more often than the building does.

Industry in Haryana runs to automotive and engineering suppliers, with large component stores feeding assembly plants to a schedule, and that is the stock these bays usually hold.

Steel Racks — what we build to

  • Load per level (UDL): 50 kg to 200 kg, evenly distributed
  • Shelf depth: 300 mm, 375 mm, 450 mm or 600 mm
  • Angle thickness: 1.2 mm (18 g), 1.6 mm (16 g), 1.8 mm, 2.0 mm (14 g) or 2.5 mm (12 g)
  • Shelf panel thickness: 0.8 mm (22 g) to 1.0 mm (20 g)

Where Steel Racks is used in Haryana

Across the trade it goes into spares and tooling stores, record rooms, retail back rooms and workshop stores. The job it does is hand-picked storage of cartons, tools, spares and files. In Haryana specifically, the enquiries come mostly from automotive and engineering suppliers, with large component stores feeding assembly plants to a schedule, so that is the stock we are usually sizing for.

Buying one rather than another

It is the cheapest position per kilogram of anything we build, and the easiest to change later. Where the load climbs past about 200 kg a level, a beam rack is the better answer and we will say so.

Getting a price for Sampla

Send the floor area you can give it, the clear height, the heaviest single shelf load and roughly how many levels you want. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.

Most Haryana enquiries are driven by throughput: the rack has to make the right item reachable now, not eventually. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Sampla.

Specifications — Steel Racks

Steel Racks are built on our Slotted Angle Racks range, so the figures below are that range's standard sizes. Spanco manufactures to order, so these are what is produced at the Bahadurgarh plant rather than a fixed catalogue size. Final bay loading is confirmed against your pallet weight, bay width and level configuration before drawings are issued.

Slotted Angle Racks manufactured at the Spanco plant in Bahadurgarh
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for Slotted Angle Racks
Rack height 5 ft to 10.5 ft (1500–3200 mm)
Bay width 750 mm, 900 mm or 1200 mm
Shelf depth 300 mm, 375 mm, 450 mm or 600 mm
Load per level (UDL) 50 kg to 200 kg, evenly distributed
Angle thickness 1.2 mm (18 g), 1.6 mm (16 g), 1.8 mm, 2.0 mm (14 g) or 2.5 mm (12 g)
Shelf panel thickness 0.8 mm (22 g) to 1.0 mm (20 g)
Levels Typically 4 to 7, adjustable on 25 mm slot pitch
Material Mild steel, CR/HR coil to IS 513 / IS 10743
Finish Powder coated
Assembly Nut and bolt, fully dismantlable

Configuration options

  • Shelf panel in MS sheet or chipboard
  • Open or closed back
  • Add-on bays sharing uprights
  • Dust covers
  • Label holders

Questions buyers ask before ordering

Do you manufacture Steel Racks to custom sizes?

Yes. Steel Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.

What load can a slotted angle rack take per shelf?

Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.

When should I use slotted angle instead of pallet racking?

The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.

Read all 6 questions on the Steel Racks page, or call +91-9811015963.

Why buyers choose Spanco

28 years Manufacturing since 1998
5,000 m² Own plant at HSIIDC Bahadurgarh
TATA / SAIL steel CR & HR coil to IS 513 / IS 10743
~2 weeks Typical lead time from order confirmation
50 kg to 200 kg Built for hand-picked storage of cartons, tools, spares and files
Products Related to Steel Racks
Ms Powder Coated Heavy Duty Stock Rack
Usage/Application Industrial
Material Iron
Color Blue
No. Of Shelves 3
Design Modern
Product Type Free Standing Unit
Surface Treatment Paint Coated
Height Customized
Size (length x Width) Customized
Storage Capacity Customized
Load per Layer 500-1000 kg/layer
Metal Racking System
Type Warehouse Rack
Load per Layer 100-200 kg,50-100 kg
Surface Finish Powder Coated
Height (meters) 3.5
Load Capacity Per Layer 100-200 Kg
Usage/Application Warehouse
Material Mild Steel (MS)
No. of Shelves 4 Shelves
Heavy Duty Steel Racks
Material Customize
No of Layers Customized
Usage/Application Industrial
Load per Layer Customized
Height (meters) Customized
Weight Customize
Color Black
Steel Racks
Surface Finish Powder Coated
No of Layers 4,2,6
Usage/Application Industrial
Load per Layer 0-50 kg,50-100 kg
Height Customize
Color Black
Material Customize
Spanco Storage Systems

Top Racks Manufacturers in Sampla — Delivering Quality

Steps of manufacture

How we work

Every rack on this site is made on one line at our own 5000 m² plant in Bahadurgarh. Nothing is bought in and re-badged, which is why we can answer for the steel grade, the coating and the bay loading on the same call.

  1. Steel coil in

  2. Punching

  3. Roll forming

  4. Shot blasting

  5. Welding and assembly

  6. Powder coating

  7. Packing

  8. Delivery and installation

See the plant and how each stage is run

Other racking we supply in Sampla

Close alternatives to Steel Racks, on the same delivery route.

As an Industrial Rack Manufacturer, we know how tough heavy storage can be. Every factory, warehouse, or shop needs racks that can carry weight…

Warehouses can become messy fast. It helps when you have a system that makes storage simple. As a Warehouse Storage Rack Manufacturer, we design…

Storing longer, bulky, or irregularly shaped products can be difficult at times. As a Cantilever Rack Manufacturer, we design our racks to allow you…

It could easily be difficult to store medium weight items, such as boxes, small tools, and supplies, in the store. As a Medium Duty Storage…

As an Industrial Shelving Systems Manufacturer we can indeed realize that it is very necessary to have strong, safe, and flexible racks that can…

As a Storage System for Godowns Manufacturer, we understand the challenges that come with storing bulk goods. Godowns often handle large, heavy…

Being a Material Storage Rack Manufacturer we realize that saving space is not the only way of efficient storage but to maintain the smooth working…

As a Godown Storage Rack Manufacturer, we know how essential sturdy and dependable storage is inside a busy godown. Our Godown Storage Racks are made…

As a Record Storage Rack Manufacturer, we understand that record management encompasses more than just piling up shelves - it is about accessibility…

Having been a Roll Storage Rack Manufacturer, we understand that storing the rolls; be it the fabrics, paper, or industrial materials is not just a…

Guides for Steel Racks

View more guides
our clients

Companies who Trust us

Send us the space, we will send the layout

A photograph of the area and a ceiling height is usually enough to start.

Also supplied near Sampla

A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Haryana.

Get a Quote