Material Storage Rack Manufacturer in Sampla
Our plant is inside Haryana, at HSIIDC Bahadurgarh, so the road leg to Sampla is short and so is the loop if a bay has to be re-made. A Material Storage Rack is industrial storage racking built to the bay, the load and the handling method of the site it is going into. Most of what we send to Haryana goes into automotive and engineering suppliers, with large component stores feeding assembly plants to a schedule.
What decides the specification in Haryana
Most Haryana enquiries are driven by throughput: the rack has to make the right item reachable now, not eventually. For Material Storage Rack the figure that settles it is the heaviest load on one level, the clear height available and what lifts the goods.
Industry in Haryana runs to automotive and engineering suppliers, with large component stores feeding assembly plants to a schedule, and that is the stock these bays usually hold.
What the range covers for Sampla
Which type suits you is decided by weight and by how the goods are handled, not by the name on the rack. The pages below set out each one in full, with the figures we build to.
- Slotted Angle Racks — a bolted angle frame with adjustable shelf panels, assembled and re-pitched on site without welding. 50 kg to 200 kg.
- Heavy Duty Steel Rack — a beam-and-upright system carrying palletised stock, handled by forklift or stacker. 500 kg to 2000 kg UDL.
- Cantilever Rack — a column with projecting arms and no front upright, so long material can be loaded along its length. Up to 1000 kg.
Not sure which applies? Send the dimensions and the handling method and we will tell you which is the cheaper fit.
Getting a price for Sampla
Send the heaviest load one level must carry, the footprint you can give the rack, the clear height to the lowest obstruction, and what lifts the goods. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.
Most Haryana enquiries are driven by throughput: the rack has to make the right item reachable now, not eventually. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Sampla.
Which system suits your load?
This page covers several racking families. The comparison below is the
quickest way to narrow down before you ask for a quotation.
Questions buyers ask before ordering
Do you manufacture Material Storage Racks to custom sizes?
Yes. Material Storage Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
What load can a slotted angle rack take per shelf?
Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.
When should I use slotted angle instead of pallet racking?
The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.
Read all
6 questions on the
Material Storage Rack page,
or call +91-9811015963.
Why buyers choose Spanco
28 years
Manufacturing since 1998
5,000 m²
Own plant at HSIIDC Bahadurgarh
TATA / SAIL steel
CR & HR coil to IS 513 / IS 10743
~2 weeks
Typical lead time from order confirmation
Spanco Storage Systems ·
Proprietorship ·
GST 06AACPV9583F1Z8 ·
Plot No. 22, Sector-16, HSIIDC, Bahadurgarh, Haryana 124507
Other racking we supply in Sampla
Close alternatives to Material Storage Rack, on the same delivery route.
As an Industrial Rack Manufacturer, we know how tough heavy storage can be. Every factory, warehouse, or shop needs racks that can carry weight…
Storage isn’t just about putting things away — it’s about finding a system that works every day. As a Steel Racks Manufacturer in Sampla, we design…
Warehouses can become messy fast. It helps when you have a system that makes storage simple. As a Warehouse Storage Rack Manufacturer, we design…
Storing longer, bulky, or irregularly shaped products can be difficult at times. As a Cantilever Rack Manufacturer, we design our racks to allow you…
It could easily be difficult to store medium weight items, such as boxes, small tools, and supplies, in the store. As a Medium Duty Storage…
As an Industrial Shelving Systems Manufacturer we can indeed realize that it is very necessary to have strong, safe, and flexible racks that can…
As a Storage System for Godowns Manufacturer, we understand the challenges that come with storing bulk goods. Godowns often handle large, heavy…
As a Godown Storage Rack Manufacturer, we know how essential sturdy and dependable storage is inside a busy godown. Our Godown Storage Racks are made…
As a Record Storage Rack Manufacturer, we understand that record management encompasses more than just piling up shelves - it is about accessibility…
Having been a Roll Storage Rack Manufacturer, we understand that storing the rolls; be it the fabrics, paper, or industrial materials is not just a…