How Do You Choose the Right Drum Storage Rack for Industrial Warehouses?
Are you looking for a reliable way to store heavy drums in your warehouse, factory, or chemical processing facility…
We manufacture at Bahadurgarh and dispatch to Madhya Pradesh by road. A Industrial Storage Rack is industrial storage racking built to the bay, the load and the handling method of the site it is going into. Most of what we send to Madhya Pradesh goes into auto components around Pithampur, plus food processing, pharmaceuticals and textiles across the state.
The useful starting point for a buyer in Seoni is what the heaviest single level has to carry, because that one number sets the section and the price. For Industrial Storage Rack the figure that settles it is the heaviest load on one level, the clear height available and what lifts the goods.
Industry in Madhya Pradesh runs to auto components around Pithampur, plus food processing, pharmaceuticals and textiles across the state, and that is the stock these bays usually hold.
Which type suits you is decided by weight and by how the goods are handled, not by the name on the rack. The pages below set out each one in full, with the figures we build to.
Not sure which applies? Send the dimensions and the handling method and we will tell you which is the cheaper fit.
Send the heaviest load one level must carry, the footprint you can give the rack, the clear height to the lowest obstruction, and what lifts the goods. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.
The useful starting point for a buyer in Seoni is what the heaviest single level has to carry, because that one number sets the section and the price. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Seoni.
This page covers several racking families. The comparison below is the quickest way to narrow down before you ask for a quotation.
| System | Typical load | Height range | Best suited to |
|---|---|---|---|
| Slotted Angle Racks | 50–200 kg per level | 5–10.5 ft | Hand-loaded cartons, spares, files and light stock |
| Pallet Racking Systems | 500–2000 kg per beam level | 3000–6000 mm | Palletised goods handled by forklift or stacker |
| Mezzanine Floors | 300–750 kg/m² | 2000–5000 mm clear | Doubling usable floor area without new construction |
| Mobile Compactor Storage Systems | 300–1000 kg per bay | 2000–2200 mm | Records and archives where aisle space is scarce |
| Cantilever Racks | up to 1000 kg per arm | 15–20 ft | Pipe, tube, bar, timber and sheet |
| Drum and Chemical Storage Racks | 300–800 kg per level | 2–3 levels | Drums and chemicals needing spill containment |
| FIFO and Flow Racks | 200–500 kg per level | 2–4 levels | Stock rotation where oldest must pick first |
Yes. Industrial Storage Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
Our Industrial Racking Systems are built from 500 kg to 2000 kg per beam level as a uniformly distributed load, with beam spans of 1500 to 3000 mm and frame depths of 600 to 1200 mm. The exact figure depends on the beam section and the span, so send us the heaviest pallet weight and how many pallets sit on one level.
Our Industrial Storage Rackings are built from 500 kg to 2000 kg per beam level as a uniformly distributed load, with beam spans of 1500 to 3000 mm and frame depths of 600 to 1200 mm. The exact figure depends on the beam section and the span, so send us the heaviest pallet weight and how many pallets sit on one level.
Read all 17 questions on the Industrial Storage Rack page, or call +91-9811015963.
Spanco Storage Systems · Proprietorship · GST 06AACPV9583F1Z8 · Plot No. 22, Sector-16, HSIIDC, Bahadurgarh, Haryana 124507
Every rack on this site is made on one line at our own 5000 m² plant in Bahadurgarh. Nothing is bought in and re-badged, which is why we can answer for the steel grade, the coating and the bay loading on the same call.
Each type below is built at our Bahadurgarh plant and delivered to Seoni. Open any one for its specification.
As a Slotted Angle Rack Manufacturer, we have witnessed that sometimes the simplest way to store items works best. Our Slotted Angle Racks are…
As an Industrial FIFO Rack Manufacturer, we know how important it is to keep goods moving in the right order. Our Industrial FIFO Racks are designed…
Are you looking for a reliable way to store heavy drums in your warehouse, factory, or chemical processing facility…
Modern warehouses and industrial facilities demand storage systems that go beyond basic shelving. They need solutio…
In today’s fast-moving industrial environment, efficient storage is no longer optional—it is a critical part of ope…
A photograph of the area and a ceiling height is usually enough to start.
A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Madhya Pradesh.