We manufacture at Bahadurgarh and supply Gujarat by road. A FIFO Rack is an inclined lane rack loaded at one face and picked at the other, so stock rotates by gravity. Loaded at one face and picked at the other, so rotation is built into the rack. Most of what we send to Gujarat goes into chemicals, pharmaceuticals, textiles and ceramics, with a high share of drummed and packaged liquids.
What decides the specification in Gujarat
Containment comes up more often here than anywhere else: what the rack holds is frequently a liquid in a drum rather than a carton. For FIFO Rack the figure that settles it is the carton or pallet weight and the slope the lane needs for it to run without stalling or racing.
Industry in Gujarat runs to chemicals, pharmaceuticals, textiles and ceramics, with a high share of drummed and packaged liquids, and that is the stock these bays usually hold.
FIFO Rack — what we build to
Load per level: 200 kg to 500 kg
Flow mechanism: Gravity roller track
Roller type: Steel roller
Material: Mild steel
Where FIFO Rack is used in Gujarat
Across the trade it goes into food, pharmaceutical and dated-stock operations, and pick faces fed from behind. The job it does is stock rotation in food, pharma and FMCG where the oldest batch leaves first. In Gujarat specifically, the enquiries come mostly from chemicals, pharmaceuticals, textiles and ceramics, with a high share of drummed and packaged liquids, so that is the stock we are usually sizing for.
Buying one rather than another
Rotation is built into the rack rather than relying on the operator, which is the point of it. The lane length and slope have to suit the actual unit, so send a sample dimension rather than a nominal one.
Getting a price for Gujarat
Send the unit weight and base dimensions, how many deep each lane should be, and your throughput per day. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.
Containment comes up more often here than anywhere else: what the rack holds is frequently a liquid in a drum rather than a carton. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Gujarat.
Specifications — FIFO Rack
FIFO Rack are built on our
FIFO and Flow Racks range, so the figures below are that
range's standard sizes.
Spanco manufactures to order, so these are what is
produced at the Bahadurgarh plant rather than a fixed catalogue size.
Final bay loading is confirmed against your pallet weight, bay width and
level configuration before drawings are issued.
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for FIFO and Flow Racks
Load per level
200 kg to 500 kg
Levels
2 to 4
Flow mechanism
Gravity roller track
Roller type
Steel roller
Material
Mild steel
Finish
Powder coated
Configuration options
Carton flow or pallet flow
Braking rollers for heavy loads
Separator guides
Pick-face stop
Questions buyers ask before ordering
When is a FIFO Racks worth the extra cost?
A FIFO Racks earns its cost wherever stock carries a shelf life or a batch number that must rotate - food, pharmaceutical and chemical storage especially. Gravity roller track presents the oldest unit first. If your stock does not age, plain selective racking is better value.
What is the difference between FIFO and LIFO racking?
FIFO loads at one end and picks at the other, so the oldest stock always presents first. LIFO loads and picks from the same face, so the last pallet in is the first out. FIFO matters wherever stock has a shelf life or a batch that must rotate. LIFO is cheaper and is fine for stock that does not age.
How steep does a flow rack need to be?
Enough for the load to move under its own weight but not so much that it arrives at the pick face too fast. The right angle depends on the weight of the unit and the friction of its base, so we set it against your actual carton or pallet rather than to a fixed figure, and fit braking rollers on heavier loads.
Top Racks Manufacturers in Gujarat — Delivering Quality
Steps of manufacture
How we work
Every rack on this site is made on one line at our own
5000 m² plant in Bahadurgarh.
Nothing is bought in and re-badged, which is why we can answer for the
steel grade, the coating and the bay loading on the same call.
Dispatch from the Bahadurgarh plant covers Gujarat. These are the towns we are asked for fIFO Rack most often — the same build and the same lead time applies to any address in the state.
