Cold Storage Rack Manufacturer in Deoria – Storage That Works With Your Cold Storage
At Spanco Storage, as a Cold Storage Rack Manufacturer, we know cold storage is not just about cold, but also and just as important, maintaining order, security and accessibility. The Cold Storage Racks in our Storage Rack withstand the coldest temperatures while remaining strong and reliable. You may notice how much easier your operations run in Deoria when racks are made to be both durable and convenient.
Cold storage areas cannot be generalized, and uniform racks seldom meet requirements. This is why our Cold Storage Racks are flexible and expandable, allowing you to rearrange shelves to accommodate crates, drums, or pallets without hassle. It is especially convenient in the area of the Deoria, where the racks are drawn accordingly, in order to provide a good circulation of air, and maintain the products in the best possible condition. Such small changes as the transfer of a shelf can help as though it were easier to do the small chores on a daily basis.
Sometimes you just need racks, and waiting is not an option. As a Cold Storage Rack Dealer, we ensure our Cold Storage Racks are ready for pickup or delivery, along with practical advice on layout and capacity in Deoria.
It often helps when local guidance suggests minor adjustments, such as shelf placement for airflow, which can make a big difference in operating efficiency and product quality. A few inches can improve access and overall satisfaction during daily operations.
Cold Storage Rack Supplier in Deoria – Strong, Reliable, and Long-Lasting
Cold storage operations need racks that can handle heavy loads while staying durable in low temperatures. As a Cold Storage Rack Supplier, we focus on solutions that are strong, safe, and built to last. You might notice how much easier inventory management becomes in Deoria when racks are tailored for cold storage challenges.
Specifications — Drum and Chemical Storage Racks
Spanco manufactures to order, so the figures below are the standard ranges
produced at the Bahadurgarh plant rather than a fixed catalogue size.
Final bay loading is confirmed against your pallet weight, bay width and
level configuration before drawings are issued.
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for Drum and Chemical Storage Racks
Drum capacity
2 to 6 drums per rack
Drum size
200 litre or 250 litre
Load per level
300 kg to 800 kg
Levels
2 to 3
Spill containment
Spill tray, 50 to 100 litre capacity
Material
Mild steel
Finish
Powder coated; galvanised for cold-store and humid duty
Configuration options
Horizontal drum cradles
Dispensing position with tap clearance
Galvanised finish for cold storage
Bund tray per level
Questions buyers ask before ordering
Do your Cold Storage Racks include spill containment?
Yes. Cold Storage Racks can be supplied with spill trays of 50 to 100 litre capacity per level, which is normally what decides the specification for chemical duty. We build for 2 to 6 drums in 200 or 250 litre sizes at 300 kg to 800 kg per level.
Do drum racks include spill containment?
Yes, spill trays of 50 to 100 litre capacity are available per level. For chemical storage this is normally the part that decides the specification, so tell us the drum contents and volume when you enquire.
How many drums per rack?
Two to six drums depending on configuration, in 200 litre or 250 litre sizes, across two or three levels, at 300 kg to 800 kg per level.
What finish should I use in a cold store or a humid area?
Powder coating is our standard finish and suits most indoor duty. For cold-store and persistently humid conditions we supply galvanised instead, because condensation cycling is harder on a painted finish than steady damp.
Top Racks Manufacturers in Deoria — Delivering Quality
Steps of manufacture
How we work
Every rack on this site is made on one line at our own
5000 m² plant in Bahadurgarh.
Nothing is bought in and re-badged, which is why we can answer for the
steel grade, the coating and the bay loading on the same call.
1
Steel coil in
Cold-rolled and hot-rolled coil from TATA Steel and SAIL arrives at the Bahadurgarh plant and is checked against IS 513 and IS 10743 before anything is cut.
2
Punching
Coil is slit to width and punched on the press. Upright perforation pitch is set here, and it is what decides the beam levels you can later move.
3
Roll forming
Flat strip is passed through the forming line and comes out as the finished section — upright, beam or panel — with the stiffening bends that carry the load.
4
Shot blasting
Mill scale and rust are stripped off the formed sections so that paint has clean, keyed steel to hold on to. Skipping this is why cheap racking flakes.
5
Welding and assembly
Bracing is welded to the uprights and beam end-connectors are fitted. Frames are squared on the jig so bays line up on site rather than being forced true.
6
Powder coating
Sections are pre-treated and powder coated, then oven cured. The coat is what stands up to forklift rub, humidity and cold-store condensation.
7
Packing
Uprights, beams and accessories are bundled by bay and labelled, so the right parts reach the right run and nothing is counted twice on site.
8
Delivery and installation
Dispatch runs approximately 2 weeks from order confirmation. Our own team installs and hands over; everything is bolted, so a run can be re-pitched or relocated later.
Other racking we supply in Deoria
Close alternatives to Cold Storage Rack, on the same delivery route.
A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Uttar Pradesh.
