Rajasthan's industry splits between the NCR-adjacent automotive corridor around Bhiwadi, Neemrana and Alwar — much of it supplying assembly plants on a schedule — and the older centres such as Jaipur and Kota, where the stock is more varied and the handling less mechanised.
Line-side supply and general warehousing need different racking, and the difference shows up in aisle width more than in the rack itself.
We build racking at Bahadurgarh in Haryana — a short road leg to the Rajasthan industrial belt — and supply across the state.
If you are feeding a plant to a schedule, the rack has to make the right pallet reachable now, not eventually. That usually means selective racking rather than deep storage: every pallet on a face, beams set to the pallet height you actually run, and aisles sized for the truck you actually own.
For stores holding a long tail of small parts, slotted angle at 50 to 200 kg per level is cheaper per position and easier to re-pitch as the stock list changes. Many units in Bundi run both: beams for the pallets, slotted angle for everything else.
Give us the heaviest pallet weight and its footprint, the clear height, the aisle you can give up and the truck type. If the layout has to suit a specific flow, send the drawing.
We extract the raw material process the product and than manufacture it for packaging
Intake of Raw Material
Quality Check
Processing
Manufacturing
Use of Phase
Packaging
As a Storage Racks Manufacturer in Bundi, we understand how important it is to have racks that actually make…
Read More
As an Industrial Storage Rack Manufacturer in Bundi, we know storage isn’t just about building heavy…
Read More
As a Pallet Rack Manufacturer in Bundi, we understand that efficient storage is not about simply stacking…
Read More
As a Mezzanine Floor Manufacturer in Bundi, we design solutions that can take on the toughest loads in Bundi…
Read More
As a Mobile Compactor Manufacturer in Bundi, we know how precious storage space is in Bundi. Our Mobile…
Read MoreIt is easy to compare two quotations on the cost of the racking and miss that one of them needs a wider aisle. The aisle is floor you are paying rent on and cannot store in. Before comparing rates per bay, work out how many pallet positions each layout actually gives you in the building you have — that number, not the rate, is what you are buying.
Most enquiries start with one of these. Find the one that sounds like your floor and the system that answers it is named beside it.
Selective pallet racking puts the same pallets on three to five beam levels, so the footprint stays the same and the storage multiplies. Beams adjust on 75 mm pitch as your pallet profile changes.
Pallet rackingA bolted steel mezzanine adds a second deck over the area you already lease, rated 300 to 750 kg per square metre. It dismantles and moves if the lease does.
Mezzanine floorsMobile compactor units run on floor tracks and share one aisle instead of giving every bay its own. The aisles you remove become storage.
Mobile compactorsCantilever racking carries long and awkward stock on open arms with no front column in the way, up to 1000 kg per arm, loaded by forklift from the front.
Cantilever racksDrum and chemical racking holds drums horizontally or upright over spill trays, so a leak is caught at the bay rather than reaching the floor.
Drum & chemical racksFIFO and flow racking loads at one face and picks at the other, so rotation is built into the rack instead of depending on the operator remembering.
FIFO & flow racksWe ensure clarity, fairness, and honesty, providing customers with upfront, accurate cost information.
We guarantee reliability, efficiency, and customer satisfaction by ensuring goods arrive as scheduled.
We as logistics partner ensure seamless, efficient, and reliable supply chain solutions across international markets.
Online support for 24/7 provide constant assistance, ensuring quick resolutions and seamless customer service anytime, anywhere.
We guarantee offer protection, reliability, and peace of mind by covering risks and ensuring quality.
Spanco Storage Systems has manufactured pallet racking, warehouse racks, industrial storage racks, mezzanine floors and compactors since 1998, from one unit at HSIIDC Bahadurgarh.
We do not operate a branch in Bundi. Racking is manufactured to your dimensions after the order and dispatched by road.
Start from the heaviest load one level has to carry and the clear height you have to work with. Ranges below are what we build to; the exact build is sized against your pallet or carton.
| System | Typical load | Height range | Best suited to |
|---|---|---|---|
| Slotted Angle Racks | 50–200 kg per level | 5–10.5 ft | Hand-loaded cartons, spares, files and light stock |
| Pallet Racking Systems | 500–2000 kg per beam level | 3000–6000 mm | Palletised goods handled by forklift or stacker |
| Mezzanine Floors | 300–750 kg/m² | 2000–5000 mm clear | Doubling usable floor area without new construction |
| Mobile Compactor Storage Systems | 300–1000 kg per bay | 2000–2200 mm | Records and archives where aisle space is scarce |
| Cantilever Racks | up to 1000 kg per arm | 15–20 ft | Pipe, tube, bar, timber and sheet |
| Drum and Chemical Storage Racks | 300–800 kg per level | 2–3 levels | Drums and chemicals needing spill containment |
| FIFO and Flow Racks | 200–500 kg per level | 2–4 levels | Stock rotation where oldest must pick first |
Not sure which row you are on? Send the heaviest pallet weight, the clear height and what lifts the goods, and we will tell you which one fits. Ask for a recommendation.
The heaviest load one level must carry, its footprint, your clear height to the lowest obstruction, and what lifts the goods.
Bay capacity is checked against your actual pallet or carton weight before any drawing is issued.
Cut, formed and powder coated at Bahadurgarh from TATA Steel and SAIL coil to IS 513 and IS 10743.
Fitted by our own team. Bolted throughout, so the racking can be reconfigured or relocated later.
The industry matters less than the unit load, which is the first thing we ask about.
Orders for Bundi are roll-formed, welded, powder coated and dispatched from our own unit in HSIIDC Bahadurgarh. We hold no depot in Bundi — the racking is built to your dimensions and sent out from the plant, which is why a beam length or a shelf pitch can still be changed after you have ordered.
Plot No. 22, Sector-16, HSIIDC, Bahadurgarh - 124507 (Haryana)
Arrange a plant visit
Reviews published on our Google Business Profile.
Our customer reviews are published on Google. Read them there.
A photograph of the area and a ceiling height is usually enough to start.
