Industrial Storage Rack Manufacturer Serving Alwar

Industrial Storage Rack Manufacturer in Alwar

We build at Bahadurgarh in Haryana, a short road leg to the Rajasthan industrial belt, and supply across the state. A Industrial Storage Rack is industrial storage racking built to the bay, the load and the handling method of the site it is going into. Most of what we send to Rajasthan goes into the NCR-adjacent automotive corridor around Bhiwadi, Neemrana and Alwar, and the older mixed-stock centres at Jaipur and Kota.

What decides the specification in Rajasthan

Line-side supply and a general store pull in opposite directions, so it is worth being clear which of the two a bay is for before it is quoted. For Industrial Storage Rack the figure that settles it is the heaviest load on one level, the clear height available and what lifts the goods.

Industry in Rajasthan runs to the NCR-adjacent automotive corridor around Bhiwadi, Neemrana and Alwar, and the older mixed-stock centres at Jaipur and Kota, and that is the stock these bays usually hold.

What the range covers for Alwar

Which type suits you is decided by weight and by how the goods are handled, not by the name on the rack. The pages below set out each one in full, with the figures we build to.

  • Slotted Angle Racks — a bolted angle frame with adjustable shelf panels, assembled and re-pitched on site without welding. 50 kg to 200 kg.
  • Heavy Duty Steel Rack — a beam-and-upright system carrying palletised stock, handled by forklift or stacker. 500 kg to 2000 kg UDL.
  • Modular Mezzanine Floor — a structural steel floor that puts a second usable level inside a building you already have. 300 kg/m².
  • File Storage Compactor — shelving mounted on rails so that bays close against each other and only the aisle in use is open. 300 kg to 1000 kg.
  • Cantilever Rack — a column with projecting arms and no front upright, so long material can be loaded along its length. Up to 1000 kg.
  • Pallet Racks For Drum — beam racking detailed for drums and packaged liquids, with cradles or decking and containment where it is needed. 2 to 6 drums per rack.
  • Industrial FIFO Rack — an inclined lane rack loaded at one face and picked at the other, so stock rotates by gravity. 200 kg to 500 kg.

Not sure which applies? Send the dimensions and the handling method and we will tell you which is the cheaper fit.

Getting a price for Alwar

Send the heaviest load one level must carry, the footprint you can give the rack, the clear height to the lowest obstruction, and what lifts the goods. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.

Line-side supply and a general store pull in opposite directions, so it is worth being clear which of the two a bay is for before it is quoted. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Alwar.

Which system suits your load?

This page covers several racking families. The comparison below is the quickest way to narrow down before you ask for a quotation.

System Typical load Height range Best suited to
Slotted Angle Racks 50–200 kg per level 5–10.5 ft Hand-loaded cartons, spares, files and light stock
Pallet Racking Systems 500–2000 kg per beam level 3000–6000 mm Palletised goods handled by forklift or stacker
Mezzanine Floors 300–750 kg/m² 2000–5000 mm clear Doubling usable floor area without new construction
Mobile Compactor Storage Systems 300–1000 kg per bay 2000–2200 mm Records and archives where aisle space is scarce
Cantilever Racks up to 1000 kg per arm 15–20 ft Pipe, tube, bar, timber and sheet
Drum and Chemical Storage Racks 300–800 kg per level 2–3 levels Drums and chemicals needing spill containment
FIFO and Flow Racks 200–500 kg per level 2–4 levels Stock rotation where oldest must pick first

Questions buyers ask before ordering

Do you manufacture Industrial Storage Racks to custom sizes?

Yes. Industrial Storage Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.

What load can your Industrial Racking Systems carry per level?

Our Industrial Racking Systems are built from 500 kg to 2000 kg per beam level as a uniformly distributed load, with beam spans of 1500 to 3000 mm and frame depths of 600 to 1200 mm. The exact figure depends on the beam section and the span, so send us the heaviest pallet weight and how many pallets sit on one level.

What load can your Industrial Storage Rackings carry per level?

Our Industrial Storage Rackings are built from 500 kg to 2000 kg per beam level as a uniformly distributed load, with beam spans of 1500 to 3000 mm and frame depths of 600 to 1200 mm. The exact figure depends on the beam section and the span, so send us the heaviest pallet weight and how many pallets sit on one level.

Read all 17 questions on the Industrial Storage Rack page, or call +91-9811015963.

Why buyers choose Spanco

28 years Manufacturing since 1998
5,000 m² Own plant at HSIIDC Bahadurgarh
TATA / SAIL steel CR & HR coil to IS 513 / IS 10743
~2 weeks Typical lead time from order confirmation
Spanco Storage Systems

Top Racks Manufacturers in Alwar — Delivering Quality

Steps of manufacture

How we work

Every rack on this site is made on one line at our own 5000 m² plant in Bahadurgarh. Nothing is bought in and re-badged, which is why we can answer for the steel grade, the coating and the bay loading on the same call.

  1. Steel coil in

  2. Punching

  3. Roll forming

  4. Shot blasting

  5. Welding and assembly

  6. Powder coating

  7. Packing

  8. Delivery and installation

See the plant and how each stage is run

The Industrial Storage Rack range we supply in Alwar

Each type below is built at our Bahadurgarh plant and delivered to Alwar. Open any one for its specification.

As a Slotted Angle Rack Manufacturer, we have witnessed that sometimes the simplest way to store items works best. Our Slotted Angle Racks are…

As an Industrial FIFO Rack Manufacturer, we know how important it is to keep goods moving in the right order. Our Industrial FIFO Racks are designed…

Guides for Industrial Storage Rack

View more guides
our clients

Companies who Trust us

Send us the space, we will send the layout

A photograph of the area and a ceiling height is usually enough to start.

Also supplied near Alwar

A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Rajasthan.

Get a Quote