Punjab's manufacturing runs on small and mid-size units with dense, heavy stock — bicycle and auto components around Ludhiana, hand tools and sports goods around Jalandhar, steel trading around Mandi Gobindgarh. The storage problem is usually the same: heavy parts, limited floor, and a building taller than the racking in it.
That is a pallet racking and cantilever question more often than a shelving one, and it is what most of our Punjab enquiries turn out to need.
We manufacture racking at Bahadurgarh in Haryana and supply it across Punjab by road. For a unit in Ajitgarh, the practical questions are load per level, clear height and whether a forklift or a stacker is doing the lifting.
Component manufacturing puts a lot of weight into a small area. Forged and machined parts, fasteners, castings and coil stock are heavy for their volume, so the limit is rarely shelf space — it is what a level can carry.
In a state where a lot of people buy steel for a living, it is worth being specific: our sections are formed from CR and HR coil to IS 513 and IS 10743, and the finish is powder coating rather than paint. If you want to compare our gauge against another quotation, ask and we will put the thickness in writing.
Send the heaviest pallet or carton weight, the floor area and the clear height. If you have a drawing, send that instead. We quote supply, or supply with fitting — say which you need for Ajitgarh.
We extract the raw material process the product and than manufacture it for packaging
Intake of Raw Material
Quality Check
Processing
Manufacturing
Use of Phase
Packaging
As a Storage Racks Manufacturer, we understand how important it is to have racks that actually make life…
Read More
As an Industrial Storage Rack Manufacturer, we know storage isn’t just about building heavy racks—it’s about…
Read More
As a Pallet Rack Manufacturer, we understand that efficient storage is not about simply stacking pallets, but…
Read More
As a Mezzanine Floor Manufacturer, we design solutions that can take on the toughest loads. Our Mezzanine…
Read More
As a Mobile Compactor Manufacturer, we know how precious storage space is. Our Mobile Compactors are…
Read MoreTwo questions come up almost every time: what gauge is the upright, and what does the level actually carry. Both are fair, and both have a number rather than an adjective as an answer. We would rather quote against your real load than against a catalogue page, because a rack specified for the wrong duty is an expensive thing to discover after it is bolted down.
Most enquiries start with one of these. Find the one that sounds like your floor and the system that answers it is named beside it.
Selective pallet racking puts the same pallets on three to five beam levels, so the footprint stays the same and the storage multiplies. Beams adjust on 75 mm pitch as your pallet profile changes.
Pallet rackingA bolted steel mezzanine adds a second deck over the area you already lease, rated 300 to 750 kg per square metre. It dismantles and moves if the lease does.
Mezzanine floorsMobile compactor units run on floor tracks and share one aisle instead of giving every bay its own. The aisles you remove become storage.
Mobile compactorsCantilever racking carries long and awkward stock on open arms with no front column in the way, up to 1000 kg per arm, loaded by forklift from the front.
Cantilever racksDrum and chemical racking holds drums horizontally or upright over spill trays, so a leak is caught at the bay rather than reaching the floor.
Drum & chemical racksFIFO and flow racking loads at one face and picks at the other, so rotation is built into the rack instead of depending on the operator remembering.
FIFO & flow racksWe ensure clarity, fairness, and honesty, providing customers with upfront, accurate cost information.
We guarantee reliability, efficiency, and customer satisfaction by ensuring goods arrive as scheduled.
We as logistics partner ensure seamless, efficient, and reliable supply chain solutions across international markets.
Online support for 24/7 provide constant assistance, ensuring quick resolutions and seamless customer service anytime, anywhere.
We guarantee offer protection, reliability, and peace of mind by covering risks and ensuring quality.
Spanco Storage Systems manufactures warehouse racks, industrial storage racks, pallet racking systems, slotted angle racks, mezzanine floors and mobile compactors, and has done so since 1998. Punjab orders are built at our Bahadurgarh plant and dispatched by road.
We do not keep a godown or an office in Ajitgarh; the racking is made to your dimensions once the order is confirmed, then sent out.
Start from the heaviest load one level has to carry and the clear height you have to work with. Ranges below are what we build to; the exact build is sized against your pallet or carton.
| System | Typical load | Height range | Best suited to |
|---|---|---|---|
| Slotted Angle Racks | 50–200 kg per level | 5–10.5 ft | Hand-loaded cartons, spares, files and light stock |
| Pallet Racking Systems | 500–2000 kg per beam level | 3000–6000 mm | Palletised goods handled by forklift or stacker |
| Mezzanine Floors | 300–750 kg/m² | 2000–5000 mm clear | Doubling usable floor area without new construction |
| Mobile Compactor Storage Systems | 300–1000 kg per bay | 2000–2200 mm | Records and archives where aisle space is scarce |
| Cantilever Racks | up to 1000 kg per arm | 15–20 ft | Pipe, tube, bar, timber and sheet |
| Drum and Chemical Storage Racks | 300–800 kg per level | 2–3 levels | Drums and chemicals needing spill containment |
| FIFO and Flow Racks | 200–500 kg per level | 2–4 levels | Stock rotation where oldest must pick first |
Not sure which row you are on? Send the heaviest pallet weight, the clear height and what lifts the goods, and we will tell you which one fits. Ask for a recommendation.
The heaviest load one level must carry, its footprint, your clear height to the lowest obstruction, and what lifts the goods.
Bay capacity is checked against your actual pallet or carton weight before any drawing is issued.
Cut, formed and powder coated at Bahadurgarh from TATA Steel and SAIL coil to IS 513 and IS 10743.
Fitted by our own team. Bolted throughout, so the racking can be reconfigured or relocated later.
The industry matters less than the unit load, which is the first thing we ask about.
Orders for Ajitgarh are roll-formed, welded, powder coated and dispatched from our own unit in HSIIDC Bahadurgarh. We deliver and install across Ajitgarh and the wider market area, with our own fitting team on site rather than a local sub-contractor. Because every bay is built to your dimensions rather than pulled from stock, a beam length or a shelf pitch can still be changed after you have ordered.
Plot No. 22, Sector-16, HSIIDC, Bahadurgarh - 124507 (Haryana)
Arrange a plant visit
Reviews published on our Google Business Profile.
Our customer reviews are published on Google. Read them there.
A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Punjab.
A photograph of the area and a ceiling height is usually enough to start.
