We manufacture at Bahadurgarh and dispatch to Madhya Pradesh by road. A File Storage Compactor is shelving mounted on rails so that bays close against each other and only the aisle in use is open. Bays close against each other, so the room gives up one aisle instead of many. Most of what we send to Madhya Pradesh goes into auto components around Pithampur, plus food processing, pharmaceuticals and textiles across the state.
What decides the specification in Madhya Pradesh
The useful starting point for a buyer in Ujjain is what the heaviest single level has to carry, because that one number sets the section and the price. For File Storage Compactor the figure that settles it is the floor: whether the rails can be laid, and whether the slab is flat enough for the bays to run true.
Industry in Madhya Pradesh runs to auto components around Pithampur, plus food processing, pharmaceuticals and textiles across the state, and that is the stock these bays usually hold.
File Storage Compactor — what we build to
Load per bay: 300 kg to 1000 kg
Drive: Manual push-pull or chain-driven handle
Configuration: Single-access or double-access (two-way)
Material: Mild steel
Where File Storage Compactor is used in Madhya Pradesh
Across the trade it goes into record rooms, hospital and institutional archives, libraries and document stores. The job it does is high-density file and record storage on rail-mounted bays. In Madhya Pradesh specifically, the enquiries come mostly from auto components around Pithampur, plus food processing, pharmaceuticals and textiles across the state, so that is the stock we are usually sizing for.
Buying one rather than another
The saving is aisle space, not shelf space: one aisle serves the whole run instead of one between every bay. In a room of fixed size that is usually the difference between keeping the records on site and renting space for them.
Getting a price for Ujjain
Send the room dimensions, the floor condition, the shelf depth you need and whether you want hand-wheel or motorised operation. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.
The useful starting point for a buyer in Ujjain is what the heaviest single level has to carry, because that one number sets the section and the price. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Ujjain.
Specifications — File Storage Compactor
File Storage Compactor are built on our
Mobile Compactor Storage Systems range, so the figures below are that
range's standard sizes.
Spanco manufactures to order, so these are what is
produced at the Bahadurgarh plant rather than a fixed catalogue size.
Final bay loading is confirmed against your pallet weight, bay width and
level configuration before drawings are issued.
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for Mobile Compactor Storage Systems
Unit height
2000 mm or 2200 mm
Levels per bay
4 to 6
Load per bay
300 kg to 1000 kg
System length
5000 mm to 12000 mm
Drive
Manual push-pull or chain-driven handle
Configuration
Single-access or double-access (two-way)
Material
Mild steel
Finish
Powder coated
Configuration options
Central locking
Anti-tilt and safety brake
Floor-embedded or surface-mounted rail
Shelf dividers and file separators
Index card holders
Questions buyers ask before ordering
How much floor space do File Storage Compactors save?
Conventional shelving spends most of its area on aisles nobody is standing in. File Storage Compactors put the bays on rails so only the aisle in use is open, which recovers a large share of that floor. Our systems run 300 kg to 1000 kg per bay, 4 to 6 levels, in lengths from 5 m to 12 m.
How much space does a mobile compactor actually save?
Conventional shelving spends most of its floor area on aisles standing empty. A compactor puts the bays on rails so they close together and only the aisle you are using is open, which recovers a large share of that floor. The exact gain depends on how many bays you run and how many aisles the fixed shelving needed.
Does the floor have to be cut for the rails?
Not necessarily. Rails can be embedded flush in the slab, which is neater and lets a trolley roll across, or surface-mounted on a sub-frame where cutting the slab is not acceptable. In leased or already-finished buildings, surface mounting is usually the answer.
Top Racks Manufacturers in Ujjain — Delivering Quality
Steps of manufacture
How we work
Every rack on this site is made on one line at our own
5000 m² plant in Bahadurgarh.
Nothing is bought in and re-badged, which is why we can answer for the
steel grade, the coating and the bay loading on the same call.
A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Madhya Pradesh.