Industrial FIFO Rack Manufacturer and Installer in Suratgarh

Industrial FIFO Rack Manufacturer in Suratgarh

We build at Bahadurgarh in Haryana, a short road leg to the Rajasthan industrial belt, and supply across the state. A Industrial FIFO Rack is an inclined lane rack loaded at one face and picked at the other, so stock rotates by gravity. Loaded at one face and picked at the other, so rotation is built into the rack. Most of what we send to Rajasthan goes into the NCR-adjacent automotive corridor around Bhiwadi, Neemrana and Alwar, and the older mixed-stock centres at Jaipur and Kota.

What decides the specification in Rajasthan

Line-side supply and a general store pull in opposite directions, so it is worth being clear which of the two a bay is for before it is quoted. For Industrial FIFO Rack the figure that settles it is the carton or pallet weight and the slope the lane needs for it to run without stalling or racing.

Industry in Rajasthan runs to the NCR-adjacent automotive corridor around Bhiwadi, Neemrana and Alwar, and the older mixed-stock centres at Jaipur and Kota, and that is the stock these bays usually hold.

Industrial FIFO Rack — what we build to

  • Load per level: 200 kg to 500 kg
  • Roller type: Steel roller
  • Material: Mild steel
  • Finish: Powder coated

Where Industrial FIFO Rack is used in Rajasthan

Across the trade it goes into food, pharmaceutical and dated-stock operations, and pick faces fed from behind. The job it does is stock rotation in food, pharma and FMCG where the oldest batch leaves first. In Rajasthan specifically, the enquiries come mostly from the NCR-adjacent automotive corridor around Bhiwadi, Neemrana and Alwar, and the older mixed-stock centres at Jaipur and Kota, so that is the stock we are usually sizing for.

Buying one rather than another

Rotation is built into the rack rather than relying on the operator, which is the point of it. The lane length and slope have to suit the actual unit, so send a sample dimension rather than a nominal one.

Getting a price for Suratgarh

Send the unit weight and base dimensions, how many deep each lane should be, and your throughput per day. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.

Line-side supply and a general store pull in opposite directions, so it is worth being clear which of the two a bay is for before it is quoted. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Suratgarh.

Specifications — Industrial FIFO Rack

Industrial FIFO Rack are built on our FIFO and Flow Racks range, so the figures below are that range's standard sizes. Spanco manufactures to order, so these are what is produced at the Bahadurgarh plant rather than a fixed catalogue size. Final bay loading is confirmed against your pallet weight, bay width and level configuration before drawings are issued.

FIFO and Flow Racks manufactured at the Spanco plant in Bahadurgarh
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for FIFO and Flow Racks
Load per level 200 kg to 500 kg
Levels 2 to 4
Flow mechanism Gravity roller track
Roller type Steel roller
Material Mild steel
Finish Powder coated

Configuration options

  • Carton flow or pallet flow
  • Braking rollers for heavy loads
  • Separator guides
  • Pick-face stop

Questions buyers ask before ordering

When is a Industrial FIFO Racks worth the extra cost?

A Industrial FIFO Racks earns its cost wherever stock carries a shelf life or a batch number that must rotate - food, pharmaceutical and chemical storage especially. Gravity roller track presents the oldest unit first. If your stock does not age, plain selective racking is better value.

What is the difference between FIFO and LIFO racking?

FIFO loads at one end and picks at the other, so the oldest stock always presents first. LIFO loads and picks from the same face, so the last pallet in is the first out. FIFO matters wherever stock has a shelf life or a batch that must rotate. LIFO is cheaper and is fine for stock that does not age.

How steep does a flow rack need to be?

Enough for the load to move under its own weight but not so much that it arrives at the pick face too fast. The right angle depends on the weight of the unit and the friction of its base, so we set it against your actual carton or pallet rather than to a fixed figure, and fit braking rollers on heavier loads.

Read all 4 questions on the Industrial FIFO Rack page, or call +91-9811015963.

Why buyers choose Spanco

28 years Manufacturing since 1998
5,000 m² Own plant at HSIIDC Bahadurgarh
TATA / SAIL steel CR & HR coil to IS 513 / IS 10743
~2 weeks Typical lead time from order confirmation
200 kg to 500 kg Built for stock rotation in food, pharma and FMCG where the oldest batch leaves first
Spanco Storage Systems

Top Racks Manufacturers in Suratgarh — Delivering Quality

Steps of manufacture

How we work

Every rack on this site is made on one line at our own 5000 m² plant in Bahadurgarh. Nothing is bought in and re-badged, which is why we can answer for the steel grade, the coating and the bay loading on the same call.

  1. Steel coil in

  2. Punching

  3. Roll forming

  4. Shot blasting

  5. Welding and assembly

  6. Powder coating

  7. Packing

  8. Delivery and installation

See the plant and how each stage is run

Other racking we supply in Suratgarh

Close alternatives to Industrial FIFO Rack, on the same delivery route.

As a Slotted Angle Rack Manufacturer, we have witnessed that sometimes the simplest way to store items works best. Our Slotted Angle Racks are…

our clients

Companies who Trust us

Send us the space, we will send the layout

A photograph of the area and a ceiling height is usually enough to start.

Also supplied near Suratgarh

A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Rajasthan.

Get a Quote