Godown Storage Rack Manufacturer in Lalitpur
We manufacture at Bahadurgarh and dispatch to Uttar Pradesh by road. A Godown Storage Rack is industrial storage racking built to the bay, the load and the handling method of the site it is going into. For a godown rather than a fitted warehouse: simple to erect, simple to extend. Most of what we send to Uttar Pradesh goes into everything from NCR-adjacent electronics and auto components to food, leather and glass further east.
What decides the specification in Uttar Pradesh
In Uttar Pradesh the specification follows the handling method more than the industry: what lifts the goods decides the rack long before the sector does. For Godown Storage Rack the figure that settles it is the heaviest load on one level, the clear height available and what lifts the goods.
Industry in Uttar Pradesh runs to everything from NCR-adjacent electronics and auto components to food, leather and glass further east, and that is the stock these bays usually hold.
What the range covers for Lalitpur
Which type suits you is decided by weight and by how the goods are handled, not by the name on the rack. The pages below set out each one in full, with the figures we build to.
- Slotted Angle Racks — a bolted angle frame with adjustable shelf panels, assembled and re-pitched on site without welding. 50 kg to 200 kg.
- Heavy Duty Steel Rack — a beam-and-upright system carrying palletised stock, handled by forklift or stacker. 500 kg to 2000 kg UDL.
Not sure which applies? Send the dimensions and the handling method and we will tell you which is the cheaper fit.
Getting a price for Lalitpur
Send the heaviest load one level must carry, the footprint you can give the rack, the clear height to the lowest obstruction, and what lifts the goods. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.
In Uttar Pradesh the specification follows the handling method more than the industry: what lifts the goods decides the rack long before the sector does. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Lalitpur.
Which system suits your load?
This page covers several racking families. The comparison below is the
quickest way to narrow down before you ask for a quotation.
Questions buyers ask before ordering
Do you manufacture Godown Storage Racks to custom sizes?
Yes. Godown Storage Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
What load can a slotted angle rack take per shelf?
Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.
When should I use slotted angle instead of pallet racking?
The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.
Read all
6 questions on the
Godown Storage Rack page,
or call +91-9811015963.
Why buyers choose Spanco
28 years
Manufacturing since 1998
5,000 m²
Own plant at HSIIDC Bahadurgarh
TATA / SAIL steel
CR & HR coil to IS 513 / IS 10743
~2 weeks
Typical lead time from order confirmation
Spanco Storage Systems ·
Proprietorship ·
GST 06AACPV9583F1Z8 ·
Plot No. 22, Sector-16, HSIIDC, Bahadurgarh, Haryana 124507
Other racking we supply in Lalitpur
Close alternatives to Godown Storage Rack, on the same delivery route.
As an Industrial Rack Manufacturer, we know how tough heavy storage can be. Every factory, warehouse, or shop needs racks that can carry weight…
Storage isn’t just about putting things away — it’s about finding a system that works every day. As a Steel Racks Manufacturer in Lalitpur, we design…
Warehouses can become messy fast. It helps when you have a system that makes storage simple. As a Warehouse Storage Rack Manufacturer, we design…
Storing longer, bulky, or irregularly shaped products can be difficult at times. As a Cantilever Rack Manufacturer, we design our racks to allow you…
It could easily be difficult to store medium weight items, such as boxes, small tools, and supplies, in the store. As a Medium Duty Storage…
As an Industrial Shelving Systems Manufacturer we can indeed realize that it is very necessary to have strong, safe, and flexible racks that can…
As a Storage System for Godowns Manufacturer, we understand the challenges that come with storing bulk goods. Godowns often handle large, heavy…
Being a Material Storage Rack Manufacturer we realize that saving space is not the only way of efficient storage but to maintain the smooth working…
As a Record Storage Rack Manufacturer, we understand that record management encompasses more than just piling up shelves - it is about accessibility…
Having been a Roll Storage Rack Manufacturer, we understand that storing the rolls; be it the fabrics, paper, or industrial materials is not just a…
