Slotted Angle Rack Manufacturer in Khanna – Simple, Reliable Storage
As a Slotted Angle Rack Manufacturer, we have witnessed that sometimes the simplest way to store items works best. Our Slotted Angle Racks are lightweight and strong, designed to accommodate everything from small tools to large carton boxes. You can see how much better everything feels when each item has its own designated place in Khanna.
The best aspect of Slotted Angle Racks is flexibility. These racks can continually be assembled and modified, meaning that you can develop layouts that are not only useful but exactly what you need. Whether you are using them for a warehouse, office, or backroom storage, our Slotted Angle Racks will give you the freedom to build and design storage your way.
Slotted Angle Rack Dealer in Khanna – Local Stock, Practical Advice
As a Slotted Angle Rack Dealer, we know that sometimes you just need racks quickly. Having a local partner makes all the difference. Our Slotted Angle Racks are available fast, so you don’t have to pause your operations in Khanna.
It often helps when someone points out small tricks—like adjusting a shelf height—to make storage more practical. That’s exactly the kind of support we give, helping you get more from every rack you install.
Slotted Angle Rack Supplier in Khanna – Flexible Storage That Lasts
Companies rely on Slotted Angle Racks to create efficient and low-cost storage. As a Slotted Angle Rack Supplier, we focus on racks that are easy to install, easy to use, and easy to adjust as your needs grow. You might notice how much simpler organization becomes when your storage adapts with you in Khanna.
Our Slotted Angle Racks are built to balance economy and strength. They’re cost-effective, reliable, and versatile enough for almost any kind of setup—whether you’re managing inventory or simply keeping things tidy.
Specifications — Slotted Angle Racks
Spanco manufactures to order, so the figures below are the standard ranges
produced at the Bahadurgarh plant rather than a fixed catalogue size.
Final bay loading is confirmed against your pallet weight, bay width and
level configuration before drawings are issued.
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for Slotted Angle Racks
Rack height
5 ft to 10.5 ft (1500–3200 mm)
Bay width
750 mm, 900 mm or 1200 mm
Shelf depth
300 mm, 375 mm, 450 mm or 600 mm
Load per level (UDL)
50 kg to 200 kg, evenly distributed
Angle thickness
1.2 mm (18 g), 1.6 mm (16 g), 1.8 mm, 2.0 mm (14 g) or 2.5 mm (12 g)
Shelf panel thickness
0.8 mm (22 g) to 1.0 mm (20 g)
Levels
Typically 4 to 7, adjustable on 25 mm slot pitch
Material
Mild steel, CR/HR coil to IS 513 / IS 10743
Finish
Powder coated
Assembly
Nut and bolt, fully dismantlable
Configuration options
Shelf panel in MS sheet or chipboard
Open or closed back
Add-on bays sharing uprights
Dust covers
Label holders
Questions buyers ask before ordering
Do you manufacture Slotted Angle Racks to custom sizes?
Yes. Slotted Angle Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
What load can a slotted angle rack take per shelf?
Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.
When should I use slotted angle instead of pallet racking?
The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.
Can shelf heights be changed later?
Yes. The angle is slotted on a 25 mm pitch, so levels can be repositioned with a spanner. Nothing is welded, so bays can also be extended, shortened or relocated.
Do you supply slotted angle racks as a manufacturer or a dealer?
As a manufacturer. We roll-form the angle and shelf panels at our own plant at HSIIDC Bahadurgarh from TATA Steel and SAIL coil, powder coat in house, and dispatch direct. We also supply to dealers and stockists on rate contract by weight.
What is the minimum order and lead time?
Minimum order is 10 pieces, or by weight on rate-contract supply. Typical lead time is about two weeks from order confirmation, subject to the size of the order and the finish specified.
Top Racks Manufacturers in Khanna — Delivering Quality
Steps of manufacture
How we work
Every rack on this site is made on one line at our own
5000 m² plant in Bahadurgarh.
Nothing is bought in and re-badged, which is why we can answer for the
steel grade, the coating and the bay loading on the same call.
1
Steel coil in
Cold-rolled and hot-rolled coil from TATA Steel and SAIL arrives at the Bahadurgarh plant and is checked against IS 513 and IS 10743 before anything is cut.
2
Punching
Coil is slit to width and punched on the press. Upright perforation pitch is set here, and it is what decides the beam levels you can later move.
3
Roll forming
Flat strip is passed through the forming line and comes out as the finished section — upright, beam or panel — with the stiffening bends that carry the load.
4
Shot blasting
Mill scale and rust are stripped off the formed sections so that paint has clean, keyed steel to hold on to. Skipping this is why cheap racking flakes.
5
Welding and assembly
Bracing is welded to the uprights and beam end-connectors are fitted. Frames are squared on the jig so bays line up on site rather than being forced true.
6
Powder coating
Sections are pre-treated and powder coated, then oven cured. The coat is what stands up to forklift rub, humidity and cold-store condensation.
7
Packing
Uprights, beams and accessories are bundled by bay and labelled, so the right parts reach the right run and nothing is counted twice on site.
8
Delivery and installation
Dispatch runs approximately 2 weeks from order confirmation. Our own team installs and hands over; everything is bolted, so a run can be re-pitched or relocated later.
Other racking we supply in Khanna
Close alternatives to Slotted Angle Racks, on the same delivery route.
