Long Span Racking System Manufacturer in Chitrakoot – Storage That Works With Your Workflow
As a Long Span Racking System Manufacturer, we know that not all storage is created equal. Our Long Span Racking Systems are built to handle heavy, bulky items without wobbling or tipping. You might notice how much smoother daily operations become in Chitrakoot when storage is designed to actually work with your space.
Each warehouse has its own requirements. Some need spans to store oversized products, while others need easily reconfigurable racks. This is what makes our Long Span Racking Systems modular, strong, and completely customizable. Minor changes, such as adjusting shelf spacing, can make a tremendous difference in workflow efficiency.
Long Span Racking System Dealer in Chitrakoot – Fast Access, Practical Advice
As a Long Span Racking System Dealer, we know that sometimes you just can’t wait weeks for storage. Our Long Span Racking Systems are available quickly, along with practical advice in Chitrakoot to help you choose the right setup.
Sometimes, it helps when someone suggests minor adjustments to improve efficiency. For example, just moving a shelf a few inches can make the job for the forklift much easier and save time in the end.
Long Span Racking System Supplier in Chitrakoot – Durable, Flexible, Ready for Anything
Warehouses need racks that are strong enough for heavy loads but flexible enough for changing needs. As a Long Span Racking System Supplier, we provide storage that adapts to your operations, making day-to-day inventory management simpler. You might notice how much smoother workflows become in Chitrakoot with racks that actually support your work, not just store it.
Our Long Span Racking Systems are premium-grade, rust-resistant, and modular. Choosing us means getting storage that grows with your business, saving time and effort while keeping everything safe and organized.
Specifications — Cantilever Racks
Spanco manufactures to order, so the figures below are the standard ranges
produced at the Bahadurgarh plant rather than a fixed catalogue size.
Final bay loading is confirmed against your pallet weight, bay width and
level configuration before drawings are issued.
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for Cantilever Racks
Column height
15 ft to 20 ft (4500–6000 mm)
Arm length
600 mm to 1000 mm
Load per arm
Up to 1000 kg
Levels
Typically 4, adjustable
Configuration
Single-sided or double-sided
Material
Mild steel
Finish
Powder coated
Configuration options
Arm end stops
Inclined arms for pipe and tube
Base-plate floor fixing
Timber or steel arm facing
Questions buyers ask before ordering
What are Long Span Racking Systems used for?
Long Span Racking Systems hold long or awkward material that will not sit on a pallet - pipe, tube, bar, angle sections, timber, boards and sheet. With no front upright in the way, material loads along the full bay length. We build up to 1000 kg per arm, arms 600 to 1000 mm, columns 15 ft to 20 ft.
What is cantilever racking used for?
Anything long that will not sit sensibly on a pallet: pipe, tube, bar, angle sections, timber, boards and sheet. Because there is no front upright in the way, material can be loaded along the full length of the bay.
How much weight can each arm carry?
Up to 1000 kg per arm in our standard build, with arm lengths from 600 mm to 1000 mm and columns from 15 ft to 20 ft. The load must be spread across arms rather than concentrated at the arm tip, which is where most overloading happens in practice.
Single-sided or double-sided?
Single-sided racks stand against a wall. Double-sided racks stand in open floor and store from both faces, which is usually the better value per tonne stored if you have the aisle for it.
Do the arms stop material rolling off?
Arm end stops are available and we recommend them for pipe and anything round. Arms can also be supplied inclined for the same reason.
Top Racks Manufacturers in Chitrakoot — Delivering Quality
Steps of manufacture
How we work
Every rack on this site is made on one line at our own
5000 m² plant in Bahadurgarh.
Nothing is bought in and re-badged, which is why we can answer for the
steel grade, the coating and the bay loading on the same call.
1
Steel coil in
Cold-rolled and hot-rolled coil from TATA Steel and SAIL arrives at the Bahadurgarh plant and is checked against IS 513 and IS 10743 before anything is cut.
2
Punching
Coil is slit to width and punched on the press. Upright perforation pitch is set here, and it is what decides the beam levels you can later move.
3
Roll forming
Flat strip is passed through the forming line and comes out as the finished section — upright, beam or panel — with the stiffening bends that carry the load.
4
Shot blasting
Mill scale and rust are stripped off the formed sections so that paint has clean, keyed steel to hold on to. Skipping this is why cheap racking flakes.
5
Welding and assembly
Bracing is welded to the uprights and beam end-connectors are fitted. Frames are squared on the jig so bays line up on site rather than being forced true.
6
Powder coating
Sections are pre-treated and powder coated, then oven cured. The coat is what stands up to forklift rub, humidity and cold-store condensation.
7
Packing
Uprights, beams and accessories are bundled by bay and labelled, so the right parts reach the right run and nothing is counted twice on site.
8
Delivery and installation
Dispatch runs approximately 2 weeks from order confirmation. Our own team installs and hands over; everything is bolted, so a run can be re-pitched or relocated later.
Other racking we supply in Chitrakoot
Close alternatives to Long Span Racking System, on the same delivery route.
A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Uttar Pradesh.
