Selective Pallet Rack Manufacturer in Banda

Selective Pallet Rack Manufacturer in Banda

We manufacture at Bahadurgarh and dispatch to Uttar Pradesh by road. A Selective Pallet Rack is a beam-and-upright system carrying palletised stock, handled by forklift or stacker. Every position on a face and directly reachable, which is what most stores need before they need density. Most of what we send to Uttar Pradesh goes into everything from NCR-adjacent electronics and auto components to food, leather and glass further east.

What decides the specification in Uttar Pradesh

In Uttar Pradesh the specification follows the handling method more than the industry: what lifts the goods decides the rack long before the sector does. For Selective Pallet Rack the figure that settles it is the pallet itself: its loaded weight, its footprint, and the truck that has to reach it.

Industry in Uttar Pradesh runs to everything from NCR-adjacent electronics and auto components to food, leather and glass further east, and that is the stock these bays usually hold.

Selective Pallet Rack — what we build to

  • Load per beam level: 500 kg to 2000 kg UDL, by beam section and span
  • Levels: Ground + 2 to ground + 4 typical
  • Material: Mild steel, CR/HR coil to IS 513 / IS 10743
  • Finish: Powder coated

Where Selective Pallet Rack is used in Uttar Pradesh

Across the trade it goes into warehouses, distribution centres, cold stores and component stores feeding an assembly line. The job it does is palletised stock handled by forklift or stacker. In Uttar Pradesh specifically, the enquiries come mostly from everything from NCR-adjacent electronics and auto components to food, leather and glass further east, so that is the stock we are usually sizing for.

Buying one rather than another

Selective racking gives every pallet a face and is right for most stores. Double-deep or drive-in buys density but costs you access, so it only pays where you hold several pallets of the same part.

Getting a price for Banda

Send the heaviest loaded pallet, its footprint, the clear height to the lowest obstruction and the truck type and its lift height. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.

In Uttar Pradesh the specification follows the handling method more than the industry: what lifts the goods decides the rack long before the sector does. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Banda.

Specifications — Selective Pallet Rack

Selective Pallet Rack are built on our Pallet Racking Systems range, so the figures below are that range's standard sizes. Spanco manufactures to order, so these are what is produced at the Bahadurgarh plant rather than a fixed catalogue size. Final bay loading is confirmed against your pallet weight, bay width and level configuration before drawings are issued.

Pallet Racking Systems manufactured at the Spanco plant in Bahadurgarh
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for Pallet Racking Systems
Beam span 1500 mm, 1800 mm, 2300 mm, 2700 mm or 3000 mm
Frame depth 600 mm, 900 mm, 1000 mm or 1200 mm
Frame height 3000 mm to 6000 mm standard; taller on survey
Load per beam level 500 kg to 2000 kg UDL, by beam section and span
Levels Ground + 2 to ground + 4 typical
Material Mild steel, CR/HR coil to IS 513 / IS 10743
Finish Powder coated
Connection Boltless beam-to-upright connector with safety pin

Configuration options

  • Mesh or MS panel decking
  • Pallet support bars
  • Column guards and end-of-aisle barriers
  • Double-deep configuration
  • Drive-in configuration
  • Row spacers for back-to-back runs

Questions buyers ask before ordering

What load can your Selective Pallet Racks carry per level?

Our Selective Pallet Racks are built from 500 kg to 2000 kg per beam level as a uniformly distributed load, with beam spans of 1500 to 3000 mm and frame depths of 600 to 1200 mm. The exact figure depends on the beam section and the span, so send us the heaviest pallet weight and how many pallets sit on one level.

How do I calculate the pallet rack capacity I need?

Start with the heaviest single pallet you will store, not the average. Multiply by the number of pallets that will sit on one beam level, which is usually two or three depending on beam span. That total is the figure the beam pair must carry as a uniformly distributed load. Then check the frame separately: add every level together and that is what the upright and its bracing must carry down to the floor. Our standard range is 500 kg to 2000 kg per beam level.

What is the difference between selective, double-deep and drive-in pallet racking?

Selective gives you a clear aisle to every pallet, so any pallet can be picked at any time. Double-deep stores pallets two rows deep, which adds pallet positions in the same floor area but means the front pallet must be moved to reach the one behind, and it needs a double-reach truck. Drive-in lets the truck enter the rack structure itself and gives the highest density, but you lose selectivity entirely, so it suits a small number of SKUs held in quantity. Selective suits most operations; density systems pay off when you have few SKUs and many pallets of each.

Read all 7 questions on the Selective Pallet Rack page, or call +91-9811015963.

Why buyers choose Spanco

28 years Manufacturing since 1998
5,000 m² Own plant at HSIIDC Bahadurgarh
TATA / SAIL steel CR & HR coil to IS 513 / IS 10743
~2 weeks Typical lead time from order confirmation
500 kg to 2000 kg UDL Built for palletised stock handled by forklift or stacker
Spanco Storage Systems

Top Racks Manufacturers in Banda — Delivering Quality

Steps of manufacture

How we work

Every rack on this site is made on one line at our own 5000 m² plant in Bahadurgarh. Nothing is bought in and re-badged, which is why we can answer for the steel grade, the coating and the bay loading on the same call.

  1. Steel coil in

  2. Punching

  3. Roll forming

  4. Shot blasting

  5. Welding and assembly

  6. Powder coating

  7. Packing

  8. Delivery and installation

See the plant and how each stage is run

Other racking we supply in Banda

Close alternatives to Selective Pallet Rack, on the same delivery route.

As a Heavy Duty Steel Racks Manufacturer, we know that warehouses need racks that can withstand heavy usage or load without the risk of failure…

As a Heavy Rack Manufacturer we understand that it is quite crucial that the warehouses and industries can have racks that can carry heavy loads with…

Being a Pallet Racking System Manufacturer, we realize that it is not merely a place of racks, but we make your day easier. Our Pallet Racking…

As a Palletised Racking System Manufacturer, we recognize that warehouses are not merely racks, but spaces for keeping work moving. Our Palletised…

Being a Medium Duty Pallet Rack Manufacturer, we understand that not all warehouses require heavy-duty industrial racks, but all warehouses require…

Being a Double Deep Pallet Racking Manufacturer, we understand that it is possible to maximize the space of a warehouse not only by stacking higher…

Being a Heavy Duty Pallet Rack Manufacturer, we understand that there are warehouses that require racks capable of serious weight daily. The Heavy…

our clients

Companies who Trust us

Send us the space, we will send the layout

A photograph of the area and a ceiling height is usually enough to start.

Also supplied near Banda

A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Uttar Pradesh.

Get a Quote