Mobile Shelving System Manufacturer in Delhi – Smart Storage Solutions for Modern Businesses
In today competitive business environment, efficient space utilization is not just an advantage — it is a necessity…
We manufacture at Bahadurgarh and send to Uttarakhand by road. A Mobile Shelving System is shelving mounted on rails so that bays close against each other and only the aisle in use is open. Bays run on rails and close together, so only the aisle in use stands open. Most of what we send to Uttarakhand goes into the pharmaceutical, FMCG and auto-component estates around Haridwar, Rudrapur and Pantnagar.
In a modern estate shed two things usually decide the design: the clear height under the truss, and whether the floor slab can take a loaded upright. For Mobile Shelving System the figure that settles it is the floor: whether the rails can be laid, and whether the slab is flat enough for the bays to run true.
Industry in Uttarakhand runs to the pharmaceutical, FMCG and auto-component estates around Haridwar, Rudrapur and Pantnagar, and that is the stock these bays usually hold.
Across the trade it goes into record rooms, hospital and institutional archives, libraries and document stores. The job it does is high-density file and record storage on rail-mounted bays. In Uttarakhand specifically, the enquiries come mostly from the pharmaceutical, FMCG and auto-component estates around Haridwar, Rudrapur and Pantnagar, so that is the stock we are usually sizing for.
The saving is aisle space, not shelf space: one aisle serves the whole run instead of one between every bay. In a room of fixed size that is usually the difference between keeping the records on site and renting space for them.
Send the room dimensions, the floor condition, the shelf depth you need and whether you want hand-wheel or motorised operation. Tell us whether you want supply only or supply with fitting, and we will quote it that way. Everything is made at our own plant at HSIIDC Bahadurgarh — we are the manufacturer, not a stockist re-badging someone else’s frames.
In a modern estate shed two things usually decide the design: the clear height under the truss, and whether the floor slab can take a loaded upright. If that is not obvious from the site, send a photograph of the bay and the dimensions, and we will mark up what will fit before anything is quoted for Bahadrabad.
Mobile Shelving System are built on our Mobile Compactor Storage Systems range, so the figures below are that range's standard sizes. Spanco manufactures to order, so these are what is produced at the Bahadurgarh plant rather than a fixed catalogue size. Final bay loading is confirmed against your pallet weight, bay width and level configuration before drawings are issued.
| Unit height | 2000 mm or 2200 mm |
|---|---|
| Levels per bay | 4 to 6 |
| Load per bay | 300 kg to 1000 kg |
| System length | 5000 mm to 12000 mm |
| Drive | Manual push-pull or chain-driven handle |
| Configuration | Single-access or double-access (two-way) |
| Material | Mild steel |
| Finish | Powder coated |
Conventional shelving spends most of its area on aisles nobody is standing in. Mobile Shelving Systems put the bays on rails so only the aisle in use is open, which recovers a large share of that floor. Our systems run 300 kg to 1000 kg per bay, 4 to 6 levels, in lengths from 5 m to 12 m.
Conventional shelving spends most of its floor area on aisles standing empty. A compactor puts the bays on rails so they close together and only the aisle you are using is open, which recovers a large share of that floor. The exact gain depends on how many bays you run and how many aisles the fixed shelving needed.
Not necessarily. Rails can be embedded flush in the slab, which is neater and lets a trolley roll across, or surface-mounted on a sub-frame where cutting the slab is not acceptable. In leased or already-finished buildings, surface mounting is usually the answer.
Read all 6 questions on the Mobile Shelving System page, or call +91-9811015963.
Spanco Storage Systems · Proprietorship · GST 06AACPV9583F1Z8 · Plot No. 22, Sector-16, HSIIDC, Bahadurgarh, Haryana 124507
| Product Type | heavy duty racks |
| Material | Mild Steel |
| Height | Customized |
| Product Code | Customize |
| No. Of Layers | Customize |
| Color | Any |
| Storage Capacity | Customized |
| Usage/Application | Industrial |
| Size/Dimension | Customize |
| Size (length x Width) | Customized |
Every rack on this site is made on one line at our own 5000 m² plant in Bahadurgarh. Nothing is bought in and re-badged, which is why we can answer for the steel grade, the coating and the bay loading on the same call.
Close alternatives to Mobile Shelving System, on the same delivery route.
As a File Storage Compactor Manufacturer, we understand that managing documents efficiently is crucial. Our File Storage Compactors are engineered to…
As a Compactor Storage Systems Manufacturer, we know how important it is to maximize storage space. Our Compactor Storage Systems are engineered to…
As a Godrej Compactor supplier, we know that efficient storage is essential for every workplace. The Godrej Compactors we supply are built to carry…
In today competitive business environment, efficient space utilization is not just an advantage — it is a necessity…
A photograph of the area and a ceiling height is usually enough to start.
A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Uttarakhand.