Industrial Shelving System Manufacturer in Chamba – Built for Everyday Storage
As an Industrial Shelving Systems Manufacturer we can indeed realize that it is very necessary to have strong, safe, and flexible racks that can accommodate every storage requirement in the location which is. All the shelving systems we develop are built to accommodate heavy loads and also be easy to adjust, which makes day to day tasks at the location of operation far easier. A good Industrial Shelving System Manufacturer will keep your racks reliable over the years even when you have to change your warehouse or store layout as often as once in Chamba warehouse.
You may find how much easier it is to do the business when you can move shelves without any complex equipment. Such flexibility may be the difference in your day to day operations. In the shelfing system of our {location} we have made it to be modular, strong and made of high quality steel and therefore your storage will be well arranged, secure and not stressed.
Industrial Shelving System Supplier in Chamba – Supply That Reaches You
Being an Industrial Shelving System Supplier, we know how important it is that racks are available exactly when you need them. Businesses count on our shelving systems to be ready the moment storage demands increase or new projects kick off. A trusted Industrial Shelving System Supplier ensures your Chamba operations never lose time waiting for racks.
From busy cities to smaller towns, our supply chain is built to deliver smoothly and on time. Many of our customers tell us how reassuring it feels to know their racks will arrive exactly when needed., we don’t just supply shelving – we bring reliability and peace of mind for your storage needs.
Industrial Shelving System Dealer in Chamba – Local Access, Personal Touch
As an Industrial Shelving System Dealer, we know that sometimes waiting isn’t an option. When racks are needed quickly, having a local Chamba dealer makes all the difference. With us, you get direct access to reliable shelving without long shipping delays or extra transport costs.
We also make buying simple. Many customers visit us not just to purchase racks but also for advice on which system will work best for their unique setup. As approachable Industrial Shelving System Dealers, we make sure your investment feels practical, cost-effective, and backed by personal support.
Industrial Shelving System Supplier in Chamba – Strong Storage, Nationwide Reach
As a dedicated Industrial Shelving System Supplier, we design racks to carry high-capacity loads safely and reliably. Whether it’s cartons, parts, or bulky goods, our shelving systems remain stable and dependable for every Chamba business. A trusted Industrial Shelving System Supplier ensures your workflow keeps running smoothly, without worrying about storage limits.
Specifications — Slotted Angle Racks
Spanco manufactures to order, so the figures below are the standard ranges
produced at the Bahadurgarh plant rather than a fixed catalogue size.
Final bay loading is confirmed against your pallet weight, bay width and
level configuration before drawings are issued.
Built to the ranges listed below — sizes are made to your bay.
Standard manufacturing ranges for Slotted Angle Racks
Rack height
5 ft to 10.5 ft (1500–3200 mm)
Bay width
750 mm, 900 mm or 1200 mm
Shelf depth
300 mm, 375 mm, 450 mm or 600 mm
Load per level (UDL)
50 kg to 200 kg, evenly distributed
Angle thickness
1.2 mm (18 g), 1.6 mm (16 g), 1.8 mm, 2.0 mm (14 g) or 2.5 mm (12 g)
Shelf panel thickness
0.8 mm (22 g) to 1.0 mm (20 g)
Levels
Typically 4 to 7, adjustable on 25 mm slot pitch
Material
Mild steel, CR/HR coil to IS 513 / IS 10743
Finish
Powder coated
Assembly
Nut and bolt, fully dismantlable
Configuration options
Shelf panel in MS sheet or chipboard
Open or closed back
Add-on bays sharing uprights
Dust covers
Label holders
Questions buyers ask before ordering
Do you manufacture Industrial Shelving Systems to custom sizes?
Yes. Industrial Shelving Systems are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
Do you manufacture Warehouse Shelving Systems to custom sizes?
Yes. Warehouse Shelving Systems are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
Do you manufacture Warehouse Shelving Racks to custom sizes?
Yes. Warehouse Shelving Racks are made to order at our Bahadurgarh plant, so bay width, shelf depth and the number of levels are set against your stock rather than a fixed catalogue size. Standard builds run 5 ft to 10.5 ft with 50 kg to 200 kg per level; tell us the heaviest level load and the bay width you want and we will confirm the angle gauge.
What load can a slotted angle rack take per shelf?
Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.
What load can a slotted angle rack take per shelf?
Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.
What load can a slotted angle rack take per shelf?
Our standard build carries 50 kg to 200 kg per level as a uniformly distributed load. The figure depends on the angle gauge and the bay width: a 900 mm bay in 2.0 mm angle carries considerably more than a 1200 mm bay in 1.2 mm angle, because the shelf is spanning further. Tell us the bay width you want and the weight you intend to put on one level and we will confirm the gauge.
When should I use slotted angle instead of pallet racking?
The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.
When should I use slotted angle instead of pallet racking?
The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.
When should I use slotted angle instead of pallet racking?
The deciding factor is what lifts the goods. If a person loads the shelf by hand, slotted angle is the cheaper and more flexible answer. Once a pallet and a forklift are involved, you need pallet racking, because beam sections and the boltless connector are designed for that impact. As a rough line, hand-loaded stock under about 200 kg per level is slotted angle territory.
Can shelf heights be changed later?
Yes. The angle is slotted on a 25 mm pitch, so levels can be repositioned with a spanner. Nothing is welded, so bays can also be extended, shortened or relocated.
Can shelf heights be changed later?
Yes. The angle is slotted on a 25 mm pitch, so levels can be repositioned with a spanner. Nothing is welded, so bays can also be extended, shortened or relocated.
Can shelf heights be changed later?
Yes. The angle is slotted on a 25 mm pitch, so levels can be repositioned with a spanner. Nothing is welded, so bays can also be extended, shortened or relocated.
Do you supply slotted angle racks as a manufacturer or a dealer?
As a manufacturer. We roll-form the angle and shelf panels at our own plant at HSIIDC Bahadurgarh from TATA Steel and SAIL coil, powder coat in house, and dispatch direct. We also supply to dealers and stockists on rate contract by weight.
Do you supply slotted angle racks as a manufacturer or a dealer?
As a manufacturer. We roll-form the angle and shelf panels at our own plant at HSIIDC Bahadurgarh from TATA Steel and SAIL coil, powder coat in house, and dispatch direct. We also supply to dealers and stockists on rate contract by weight.
Do you supply slotted angle racks as a manufacturer or a dealer?
As a manufacturer. We roll-form the angle and shelf panels at our own plant at HSIIDC Bahadurgarh from TATA Steel and SAIL coil, powder coat in house, and dispatch direct. We also supply to dealers and stockists on rate contract by weight.
What is the minimum order and lead time?
Minimum order is 10 pieces, or by weight on rate-contract supply. Typical lead time is about two weeks from order confirmation, subject to the size of the order and the finish specified.
What is the minimum order and lead time?
Minimum order is 10 pieces, or by weight on rate-contract supply. Typical lead time is about two weeks from order confirmation, subject to the size of the order and the finish specified.
What is the minimum order and lead time?
Minimum order is 10 pieces, or by weight on rate-contract supply. Typical lead time is about two weeks from order confirmation, subject to the size of the order and the finish specified.
Top Racks Manufacturers in Chamba — Delivering Quality
Steps of manufacture
How we work
Every rack on this site is made on one line at our own
5000 m² plant in Bahadurgarh.
Nothing is bought in and re-badged, which is why we can answer for the
steel grade, the coating and the bay loading on the same call.
1
Steel coil in
Cold-rolled and hot-rolled coil from TATA Steel and SAIL arrives at the Bahadurgarh plant and is checked against IS 513 and IS 10743 before anything is cut.
2
Punching
Coil is slit to width and punched on the press. Upright perforation pitch is set here, and it is what decides the beam levels you can later move.
3
Roll forming
Flat strip is passed through the forming line and comes out as the finished section — upright, beam or panel — with the stiffening bends that carry the load.
4
Shot blasting
Mill scale and rust are stripped off the formed sections so that paint has clean, keyed steel to hold on to. Skipping this is why cheap racking flakes.
5
Welding and assembly
Bracing is welded to the uprights and beam end-connectors are fitted. Frames are squared on the jig so bays line up on site rather than being forced true.
6
Powder coating
Sections are pre-treated and powder coated, then oven cured. The coat is what stands up to forklift rub, humidity and cold-store condensation.
7
Packing
Uprights, beams and accessories are bundled by bay and labelled, so the right parts reach the right run and nothing is counted twice on site.
8
Delivery and installation
Dispatch runs approximately 2 weeks from order confirmation. Our own team installs and hands over; everything is bolted, so a run can be re-pitched or relocated later.
Other racking we supply in Chamba
Close alternatives to Industrial Shelving System, on the same delivery route.
A single lorry covers several of these towns on the same run, so ordering alongside a neighbouring site usually shortens the wait across Himachal Pradesh.
